volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing front mid-range loudspeakers > < Removing and installing loudspeakers, Golf Plus

Golf Mk6

Removing and installing front bass loudspeakers
Removing and installing front bass loudspeakers
  Note
Removal and installation is performed in the same manner on the left and right sides.
Removing:
Before beginning dismantling work, perform the following steps:
–  Switch off ignition and all electrical consumers and remove ignition key.
To renew a loudspeaker, first remove the door trim → General body repairs, interior; Rep. gr.70 or → General body repairs, interior; Rep. gr.70
   
–  Release locking mechanism on connector -arrows- and disconnect connector.
  N91-10158
–  Drill out rivets -arrows- using suitable drill bit and remove loudspeaker.
  Note
t  It is essential that all swarf be removed from the door because otherwise corrosion damage will occur.
t  If, when drilling out rivets, damage to the paintwork is caused, rectify the damage immediately.
Installing:
–  When installing new loudspeaker, secure with special pop rivets (note part number!)
Remainder of installation is carried out in reverse order of removal.
  N91-10159

Removing and installing front mid-range loudspeakers > < Removing and installing loudspeakers, Golf Plus