volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear treble loudspeakers > < Removing and installing front treble loudspeakers

Golf Mk6

Removing and installing rear bass loudspeakers
Removing and installing rear bass loudspeakers
  Note
Removal and installation is performed in the same manner on the left and right sides.
Removing:
Before beginning dismantling work, perform the following steps:
–  Switch off ignition and all electrical consumers and remove ignition key.
The door trim must be removed before a loudspeaker can be removed → General body repairs, interior; Rep. gr.70.
   
–  Release locking mechanism on connector -arrows- and disconnect connector.
  N91-10158
–  Drill out rivets -arrows- using suitable drill bit and remove loudspeaker.
  Note
t  It is essential that all swarf be removed from the door because otherwise corrosion damage will occur.
t  If, when drilling out rivets, damage to the paintwork is caused, rectify the damage immediately.
Installing:
–  When installing new loudspeaker, secure with special pop rivets. (Observe part number!)
Remainder of installation is carried out in reverse order of removal.
  N91-10169

Removing and installing rear treble loudspeakers > < Removing and installing front treble loudspeakers