volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing central locking deadlock function warning lamp -SAFE-K133 > < Driver side window regulator switch element

Golf Mk6

Removing and installing driver side window regulator switch element
Removing and installing driver side window regulator switch element
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove front door trim on driver side → General body repairs, interior; Rep. gr.70.
–  Use removal wedge -VAS 3409- or screwdriver to carefully prise mounting frame out of door trim -arrow-.
  W00-0016
–  Release and disconnect connectors -arrow-.
  N96-10158
–  Release locking lugs -arrows- and remove switch from installation frame.
Installing:
Installation is carried out in reverse order of removal.
  N96-10157

Removing and installing central locking deadlock function warning lamp -SAFE-K133 > < Driver side window regulator switch element