volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing fog light / static cornering light bulb > < Fog lights Golf - assembly overview

Golf Mk6

Removing and installing fog light
Removing and installing fog light
  Note
The illustrations show removal and installation of the front left fog light.
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
   
–  Unclip cover cap -1- from retainers.
  N94-11547
–  Remove securing bolt -arrow-.
  N94-11548
–  Swing fog light housing out of bumper cover taking connected wiring length into consideration.
–  Release and disconnect connector -arrow- and remove fog light housing.
Installing:
Installation is carried out in the reverse order. When installing observe the following:
–  Tighten all threaded connections to torques specified in assembly overview → Chapter.
–  Check function of headlight.
–  Checking fog light settings and adjusting if necessary „Maintenance manual“ → Booklet
  N94-10186

Removing and installing fog light / static cornering light bulb > < Fog lights Golf - assembly overview