volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing LED module for daytime running light and side lightL176

Golf Mk6

Removing
Removing
  Note
Removal and installation procedure is carried out on left side of vehicle. Installation and removal of right LED module for daytime running light and side light -L177- is carried out similarly on right side of vehicle.
–  Remove front bumper cover → Rep. gr.63.
   
–  Unclip electrical connector -1- for LED module for daytime running light and side light from front air intake grille -2-.
–  Disconnect electrical connector -1-.
  N94-11786
–  Remove air intake grille -1- → Rep. gr.63.
  N94-11785
–  Remove bolts -1-.
  N94-11787
–  Remove LED module for daytime running light and side light -1- from bumper.
–  To do this, guide wiring harness -3- through opening in bumper -2-.
  N94-11788

Installing > < Removing and installing LED module for daytime running light and side lightL176