Volkswagen Workshop Service and Repair Manuals > Golf Mk6 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | Number plate light | Bolted number plate lightX | Removing and installing bolted number plate light

Removing and installing bolted number plate light

Removing:

–	Switch off ignition and all electrical consumers and remove ignition key.

–	Press locking tab -arrow- in direction of arrow using a suitable screwdriver and remove number plate light from bumper.

–	Release and disconnect connector -arrow-.

Installing:

Install in the reverse order of removal. When doing this, note the following:

Note

A small silver coloured anti-dazzle strip -arrow- is fitted in number plate light lens. When installing lens, it must always be towards bumper.

–	Check function of number plate light.

Volkswagen Workshop Service and Repair Manuals