Golf L4-1.8L Turbo (AWD) (2000)
-
Insert flat screwdriver in lower partition between panel - 1 - and grip recess - 2 -.
-
Unclip grip recess - 2 - upward out of door trim, do not reach into grip depression while doing so, to prevent damage to brace - 1 -.
-
Press locking lug against connector - 3 - - arrow - and remove.
-
Remove screws - arrows -.
-
Unclip door trim - 1 - at sides using Disassembly pliers 3392.
-
Lift door trim upward out of window recess.
-
Unclip cable guide - 1 - using a flat screwdriver - 2 -, remove bracket - 3 - in direction of - arrow - and unhook cable hook - 4 -.
-
Disconnect harness connectors.
Installing