Golf L4-1.8L Turbo (AWW) (2003)
-
Guide Assembly tool T10034 into door through opening in inner door plate.
-
Light inner part of door using a flashlight for better view.
-
Hook assembly tool into spring - 1 - - arrow A -.
-
Engage spring into door lock by pulling installation tool - arrow B -.
-
Install door handle into door.
-
Insert clip - 1 - into metal cut out and engage into door handle - 2 -.
-
Insert lock cylinder housing at right angle into door handle mounting bracket.
-
Now screw in bolt into mounting bracket using torque wrench.
Door handle engages again into lock cylinder housing with a very audible click.
NOTE: During installation, door handle - 2 - must be pressed onto door plate.
-
Then, perform in reverse order of removal.
-
Then a function test must be performed, since door cannot be opened if adjustment and clips of Bowden cable are not correct.