Golf L4-1.8L Turbo (AWW) (2003)
Brake Pedal Assy: Service and Repair
Removal and Installation
Brake pedal, removing and installing
Additional information
-
Refer to Powertrain Management; On Board Diagnostic (OBD)
Removing
-
Remove trim below instrument panel.
-
Remove screws -1-.
-
Remove cover -A-.
-
Remove connecting plate between clutch and brake pedals on vehicles with a manual transmission.
-
Remove brake light switch -1-.
-
Disconnect accelerator cable.
-
Vehicles with accelerator pedal position sensor, release connector below instrument panel.
-
Disconnect brake pedal from brake booster.
-
Remove hex nuts item - 2 -.
-
Take out pedal cluster.
-
Remove brake pedal.
Installing
Install in reverse order.
-
Adjust brake light switch.
-
Brake light switch: adjusting