Golf L4-1.8L Turbo (AWW) (2003)
-
8 Nm (71 in. lb)
7
-
Refrigerant line
-
From receiver drier to expansion valve
8
-
Refrigerant hose
-
From expansion valve to compressor
-
With damper
9
-
O-ring
-
Always replace
-
16.7 mm; 1.8 mm
10 -
Expansion valve
-
Located in right side of engine compartment
-
Hole for refrigerant lines at bulkhead must be must be sealed against splash water
11 -
O-ring
-
Always replace
-
14 mm; 1.8 mm
Removing
-
Discharge refrigerant system.
-
Remove insulator -3-.
-
Remove retaining screw -6-.
-
Pull out refrigerant lines -7- and -8- and move aside.
-
Remove bolts -4-.
-
Remove expansion valve -10-
NOTE: When replacing expansion valve, always replace 0 rings - 5- & -9-, -2- & -11-.