Golf L4-1.8L Turbo (AWW) (2003)
-
Tension toothed belt. To do this, remove pin T40011 and remove tensioning bolt T1 0092.
-
Turn over crankshaft twice and check if markings on camshaft and crankshaft still align with their reference points.
-
Install vibration damper and belt pulley tightening torque: 25 Nm
-
Install center part of toothed belt (insert bolts with Locking Compound D 000 600 A2.) Torque specification: 10 Nm
-
Install toothed belt cover - upper part.
-
Install engine mount. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount
-
Install tensioner for ribbed belt. Torque specification: 25 Nm
-
Install ribbed belt. See: Ribbed Belt
Removing
-
Read safety precautions before beginning work on fuel supply system.
-
Observe Rules for Cleanliness.
-
Remove engine cover.
-
Remove sound insulation tray. See: Body and Frame/Sound Proofing / Insulation
-
Remove right headlamp. See: Lighting and Horns/Headlamp
-
Remove air guide pipe between turbocharger and charge air cooler. See: Powertrain Management/Fuel Delivery and Air Induction/Turbocharger
-
Remove ribbed belt. See: Ribbed Belt
-
Remove ribbed belt tensioning element.
Engine installed:
-
Position crankshaft at TDC No. 1 cylinder (vehicles with manual transmission).