Golf L4-1.8L Turbo (AWW) (2003)
1
-
Side airbag, driver with igniter for side airbag -N199- or front passenger with igniter for side airbag -N200-
2
-
Bolt
-
Qty. 2
-
7 Nm
3
-
Connector
4
-
Backrest frame
Driver And Front Passenger Seat Side Airbags, Removing And Installing
Driver And Front Passenger Seat Side Airbags, Removing And Installing
NOTE:
-
Removal and installation is described for right side of vehicle. same instructions apply for removal and installation for left-hand side.
-
Observe notes regarding coding in radio operators manual before disconnecting battery.
-
After connecting battery, vehicle options (radio, clock, electric window regulator) must be checked according to repair manual and/or user manual.
Removing
-
Disconnect battery Ground (GND) strap.
-
Remove driver/passenger seat.
-
Remove backrest frame.
CAUTION: Observe safety precautions for working on airbags.
-
Loosen backrest cover in area of airbag - 1 -.
-
Remove screws - 2 - (qty. 2, 7 Nm).
CAUTION: Electrostatic charges may result in involuntary deployment of airbag. Therefore, mechanic must be electrostatically
discharged before disconnecting ignition- and Ground (GND) wires. This is done e.g. by briefly grasping chassis or door striker.
-
Disconnect connector - 3 - from airbag unit - 1 -.