Golf L4-1.8L Turbo (AWW) (2003)
ABS System Components On Rear Axle, Removing And Installing
1. ABS wheel speed sensor
-
Before inserting sensor, clean mounting hole inner surface and coat with lubricant G 000 650
2. Hex socket head bolt, 8 Nm (70 inch lbs.)
3. Stub axle
4. Splash shield
5. Wheel hub with wheel bearing and speed sensor rotor
-
Replace each time after disassembly
-
Only replace complete
-
Removing and installing
6. Self-locking 12-point nut, 175 Nm (129 ft. lbs.)
-
Replace each time after removing
7. Cap
-
Pressing off and driving in
8. Brake disc
9. Screw
10. Hex bolt, 60 Nm (44 ft. lbs.)
-
With dished spring
11. Axle beam
Wheel speed sensor on rear axle, removing and installing
Removing
-
Raise vehicle.