Golf L4-1.8L Turbo (AWW) (2003)
-
Clip fuse holder mountings into battery box -1 and -2-.
-
Install positive terminal clamp.
-
Tighten securing bolt to 6 Nm.
-
Only after the fuse holder and positive terminal have been secured should the negative terminal clamp be installed.
-
Tighten securing bolt to 6 Nm.
-
Reinstall cover -1- with screws -arrows-.
-
Reinstall and secure battery cover.
-
Clip positive cable into retainer.
CAUTION!
If battery is not secured properly, the following will result:
-
Shortened battery service life due to vibration damage.
-
Battery cell and plate damage.
-
Electrolyte leakage due to battery case damage.
-
Poor collision safety.