Golf L4-1.8L Turbo (AWW) (2003)
-
Remove ribbed belt.
-
Remove belt pulley hex. socket head bolt.
-
Clamp off suction hose with hose clamps -3094-.
-
Open spring-type clip -3- and pull off suction hose.
Use special tool VAS 5024 for this.
-
Remove banjo bolt -4-.
-
Seal pressure line/hose with a plastic bag or similar.
-
Remove hex. bolts -1- and -2-.
-
Remove pump.
Installing
-
Fill power steering pump with hydraulic oil.
Fill pump with oil via suction union.
-
Turn hub by hand until oil comes from pressure side.
-
Install power steering pump on bracket and tighten bolts to 25 Nm (18 ft. lbs.).
-
Install suction hose and install spring-type clip.