Golf L4-1.8L Turbo (AWW) (2003)
Installing
Greasing bonded rubber bushing
-
Grease bonded rubber bushing kidney shaped cavity with assembly paste G 052 150 A2 before installing rear axle.
Installation is performed in the reverse sequence:
After installing check position of steering wheel during a test drive.
If steering wheel is not in straight ahead position the wheel alignment must be checked!
Tightening torques:
Shock absorber to body ............................................................................................................................................................... 75 Nm (55. ft. lbs.)
Use new bolts!
Bearing bracket to rear axle ......................................................................................................................................................... 80 Nm (59 ft. lbs.)
Use new nuts and bolts!
Bonded Rubber Bushing, Removing and Installing
Bonded rubber bushing, removing and installing
Special tools and equipment
^
VW 771 Multi-purpose tool
^
3301 Assembly tool
^
3346 Assembly tool
^
3416/1 Press piece
^
3416/2 Press piece 3416/3 Support tube
Removing