Golf L4-1.8L Turbo (AWW) (2003)
Flex Plate: Service and Repair
Drive plate, removing and installing
Special tools and equipment
-
VW 558 Retainer
-
Hexagon bolt M8x45 and two M10 hexagon nuts
-
Depth gauge
Loosening and tightening drive plate
-
Secure counter-hold tool VW 558 to the drive plate with a hexagon bolt M8x45. Place two M10 hexagon nuts-1-between counter-hold tool and
drive plate.
Position of counter-hold tool:
-
A-To loosen
-
B-To tighten
-
Loosen drive plate bolts.
Installing drive plate
-
Locate drive plate and packing plate with recesses-1-.