Golf L4-1.8L Turbo (AWW) (2003)
Wiper Blade: Service and Repair
Wiper Rubber, Removing And Installing
-
Using a pair of pliers, press together both steel strips on enclosed side of rubber, slide rubber sideways out of upper clip and remove rubber
complete (slide rubber through remaining clips).
-
Insert new rubber into lower clips of wiper blade.
-
Insert both strips in the first groove of the rubber so that the recesses in the strips face the rubber and engage in the rubber lugs of the groove.
-
Using pliers press both steel strips and rubber together and insert in the upper clips so that the lugs of the clips on both sides engage in the
retaining slots -arrow- of the wiper blade rubber.