Golf L4-1.9L DSL Turbo (ALH) (1999)
-
Must be seated correctly in groove
7
-
Clutch coil
-
Installing See Fig. 5
NOTE: A thermo-fuse integrated into the clutch coil protects the A/C clutch in the event of overheating (e.g.: due to a binding compressor) The clutch
coil circuit is interrupted.
8
-
Felt gasket
-
Always replace
9
-
Screw
10
-
Compressor
-
Manufacturer: Zexel
Clutch Plate Bolt, Removing
A/C Clutch - N25- (Zexel), Servicing
A/C Clutch -N25- (Zexel), Removing And Installing
Clutch plate bolt, removing
-
Remove bolt
-
Tightening torque: 15 Nm (11 ft. lb.)
When removing and installing bolt, counter-hold with 2 hole pin wrench -A- (3212 or equivalent) with pin diameter: 4 mm.
Clutch Plate, Removing
A/C Clutch - N25- (Zexel), Servicing
Clutch plate, removing