Golf L4-1.9L DSL Turbo (ALH) (1999)
Control Assembly: Service and Repair
With Manual A/C
Removal and Installation
Special tools required:
-
Special tool 3370
First do the following:
Remove glove box.
Remove trim under the steering column.
Remove center console. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair
-
Pull off heating controls trim panel with tool 3370.
-
Remove screws -arrows-.
-
Remove center trim.
-
Remove controls with cables attached.
-
Disengage cables from controls.
-
Disconnect electrical connectors.
After removing controls, check all cables for free movement.