Golf L4-1.9L DSL Turbo (ALH) (1999)
Tail Lamp: Service and Repair
Rear Light Housing, Removing and Installing
Rear Light Housing (Golf), Removing And Installing
Removing
-
Switch off all electrical consumers, switch off ignition key and remove ignition key.
-
Remove rear luggage compartment side panel trim (left or right):
-
Remove nuts -arrows- (Qty. 3) and remove housing.
-
Remove bulb holder.
Installing
-
Install bulb holder.
-
Insert housing into body opening.
-
Tighten nuts (3 Nm).
-
Install applicable rear luggage compartment side panel trim.