Golf L4-1.9L DSL Turbo (ALH) (1999)
-
Clamp steering gear in vice and remove tie rod.
Installing
Install in reverse sequence.
Tightening torque:
Tie rod to power steering gear 75 Nm (55 ft. lbs.)
Installing boot
-
Check boot for wear (cuts, cracks) and ensure sealing surfaces are clean.
-
Install boot, but first turn tie rod so tie rod end is in installed position.
NOTE: Only use genuine clamps.
-
Tension clamp with pliers VAG 1275.
-
Install power steering gear.