Golf L4-1.9L DSL Turbo (ALH) (1999)
9. Bracket
-
Secured to body work
10. Dust cap
11. Bleeder valve
-
Bleeding clutch system.
12. Slave cylinder
Remove the following components before removing slave cylinder
-
Gear selector cable from gear selector lever.
-
Relay lever and actuating arm for gate selector cable.
After installing:
-
Adjust gear selector mechanism.
13. Collared securing bolt, 25 Nm
14. Transmission
15. Clip
16. Seal
-
Lubricate with brake fluid
-
Pull onto line/hose connection
17. Cable support bracket
18. Hose bracket Secure to control cable support bracket
19. Clip
Fig. 1 Pry retainer -A- off in direction of arrow
Fig. 2 Press master cylinder operating rod into retainer -A- in direction of arrow