Golf L4-1.9L DSL Turbo (ALH) (1999)
-
Insert wiper arm -2- into setting device and secure with lock screw -3-.
-
Check contact angle.
Contact angle (specification)
Driver's side
-8.5 °
Passenger's side
-1.0 °
Rear window wiper
0 °
Tolerance
±2 °
Adjust contact angle to specification, if required, as follows:
-
Place 24 mm open end wrench -1- on setting device and adjust wiper arm -2- to specification (arrows).
-
Release wiper arm -2- from setting device and then re-secure with lock screw -3-.
-
Compare adjustment readout with table. If necessary repeat adjustment.
-
Remove setting device and install wiper blade.
Wiper arm tightening torque: 20 Nm (15 ft. lb)
-
Check that wiper system operates without skipping.