Golf L4-1.9L DSL Turbo (BEW) (2004)
Brake Bleeding: Service and Repair
Brake System, Bleeding Without Pressure Bleeder
Brake system, bleeding without pressure bleeder
-
Build-up brake pressure in brake system by pumping brake pedal.
-
Connect hose from bleeder bottle to brake bleeder valve at each wheel in turn (Bleeding sequence).
-
Open bleeder valve.
-
Hold brake pedal down, close bleed screw.
Note: The brake fluid level in the reservoir must not fall below the MIN mark during bleeding.
-
Release brake pedal.
-
Repeat operation until brake fluid flows without air bubbles.
Brake fluid, changing
Refer to Brake Fluid; Service and Repair.