Golf L4-1.9L DSL Turbo (BEW) (2004)
-
Apply a drop of sealant AMV1 7400401 (approximately 5 mm diameter) - arrows - to both side edges of front bearing cap/cylinder head sealing
surfaces.
-
Apply a drop of sealant AMV1 7400401 (approximately 5 mm diameter) - arrows - to both side edges of rear bearing cap/cylinder head sealing
surfaces.
-
Tighten cylinder head cover hand tight in sequence 1 ... 13-.
-
Tighten bolts to 10 Nm in sequence -1 ... 13-.