Golf L4-1.9L DSL Turbo (BEW) (2004)
Oil Pan: Service and Repair
Oil pan, removing and installing
Special tools, testers and auxiliary items required
^
Torque wrench (5 ... 50 Nm) V.A.G1331
^
Drill motor with plastic brush
^
Protective glasses
^
Flat scraper
^
Silicone sealant D 176 404 A2
Removing
-
Remove center, left and right sound insulation trays:
-
Drain engine oil.
Note: Observe disposal regulations!
-
Remove securing bolts for oil pan.
-
Loosen oil pan with light blows of a rubber-headed hammer, if necessary.
-
Remove oil pan.
-
Remove sealant residue on cylinder block with a flat scraper.
-
Remove sealant residue on oil pan with a rotating brush, e.g. a drill motor with a plastic brush (wear eye protection).
-
Clean sealing surfaces. Surfaces must be free of oil and grease.
Installing
Note:
^
Observe the use-by date of the sealing compound.
^
The oil pan must be installed within 5 minutes of applying the silicone sealing compound.