Golf L4-1.9L DSL Turbo (BEW) (2004)
Exhaust Manifold: Service and Repair
Turbocharger With Attachments, Removing and Installing
Turbocharger with attachments, removing and installing
Installation notes
Observe safety precautions .
Observe rules for cleanliness .
Note:
^
All hose connections secured by clips.
^
The charge air system must be free of leaks.
^
Do not install hose connections with lubricant containing oil.
^
For assembly use lubricating agent (water without additive) if necessary. Do not use lubricating agents containing oil.
^
When repairing remove oil from connections and hose ends.
^
Before connecting oil supply line fill turbocharger at connection with engine oil.
^
After installing turbocharger run engine for approximately I minute at idling speed, do not rev engine. This ensures that the turbocharger is
adequately lubricated.
^
Replace self-locking nuts.