Golf L4-1.9L DSL Turbo (BEW) (2004)
EGR Cooler: Service and Repair
Exhaust gas recirculation cooler, installing
Special tools, testers and auxiliary items required
-
Torque wrench V.A.G. 1331
Note: Adhere to the procedure described to prevent damage due to component stress.
-
Assemble bypass flap - 1 - with seal - 2 - and two bolts - 5 with EGR cooler - 3 - and tighten by hand.
-
Insert four bolts - 4 - and tighten all bolts to 10 Nm.
-
Mount EGR cooler - 7 - to intake manifold - 6 - with 3 bolts - 8 - tightened by hand (EGR cooler must make contact and must be able to move
within bolt holes).
-
Insert bolt - 9 - and tighten it to 10 Nm.