volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Tandem Pump, Removing and Installing|Page 3286 > < Tandem Pump, Removing and Installing|Page 3284
Page 1
background image

Diesel MFI Pump: Service and Repair
Rules For Cleanliness

Rules for cleanliness 

When working on the fuel supply/injection system, pay careful attention to the following "6 rules" -.
^

Thoroughly clean all unions and adjacent areas before disconnecting.

^

Place removed parts on a clean surface and cover. Do not use fluffy cloths!

^

Carefully cover opened components or seal if repairs cannot be performed immediately.

^

Only install clean components- Only unpack replacement parts immediately prior to installation. Do not use parts that have not been stored in their
packing (e.g. in tool boxes etc.).

^

When the system is open- Do not work with compressed air if this can be avoided. Do not move the vehicle unless absolutely necessary.

^

Also ensure that no diesel fuel contacts the coolant hoses. If necessary, hoses must be cleaned immediately. Affected hoses must be replaced.

Tandem Pump, Removing and Installing|Page 3286 > < Tandem Pump, Removing and Installing|Page 3284