Golf L4-1.9L DSL Turbo (BEW) (2004)
/Page-979007.png)
^
Select "Check DTC memory - complete system" which will interrogate all fault memories.
Erase ALL fault memories.
^
Once ALL fault memories have been erased:
^
Select vehicle system "01-Engine electronics".
^
Select "Update - Programming" option at bottom of screen
(arrow).
"Update - Programming" (flashing), performing
After selecting "Update - Programming" function:
New program version 038997016H software level 8008 (Bosch) or
038997016J software level 8009 (NGK) and approximate timing for
update is shown on the VAS 5051/5052 screen.
^
By selecting the --> button, the programming procedure begins.
Similar screen appears:
The previous data in the ECM is erased and the new data is being transferred to the module from the flash CD.
