Golf L4-1.9L DSL Turbo (BEW) (2004)
/Page-289009.png)
To erase ALL fault memories:
^
Confirm by selecting the --> button.
Tip:
Erase fault memories takes approx. 15 minutes.
Similar screen appears.
Old ECM Part No. and software level still appear at (arrow)
Function ended appears at bottom of screen.
^
Finish update of the ECM by selecting the button.
Similar screen appears.
Updated software level 038997016 H software level 8008 (Bosch) or
03899-016 J software level 8009 (NGK) will appear at (arrow).
Flash CD can now be removed from VAS 5051 or VAS 5052 Diagnostic tool.
^
Print the ECM screen to verify ECM update software level.
^
Attach print to vehicle Repair Order.
Select "Go to" then select "Exit".
Tip:
It is not generally necessary to encode the ECM following the "update - Programming" (flashing procedure.
However, you must set the readiness code.
^
Set readiness code.
Use VAS 5051 or VAS 5052 to set readiness code.
