Golf L4-1.9L DSL Turbo (BEW) (2004)
/Page-1388003.png)
1. Gas-filled shock absorber
^
Can be replaced individually
^
Application; Refer to Parts Supplier
^
Disposal observe environmental regulations
^
Functional check
^
Press shock absorber together by hand. When doing this the piston rod must move over its complete length smoothly and with even force.
^
When the shock absorber has sufficient gas pressure the piston rod returns to its original starting position.
^
If the piston rod does not return to its starting position and there is no loss of oil then the shock absorber is still OK.
2. Protective cap
3. Protective tube
4. Bump stop
5. Shock absorber mounting
6. Self-locking hex nut, 25 Nm (18 ft. lbs.)
^
Always replace
7. Cover
