Golf L4-1.9L DSL Turbo (BEW) (2004)
1. Axle shaft
^
For special model "Golf GTI 132 kW"
^
Pulling axle shaft out from wheel hub and pressing in
2. Axle shaft
^
Pulling axle shaft out from wheel hub and pressing in
3. Speed sensor
4. Hex socket head bolt, 10 Nm (89 in lb)
5. Suspension strut
6. Hex bolt
^
Always replace
^
The point on the hex bolt must point in normal direction of travel
7. Tie rod end
8. Self-locking nut
^
60 Nm (44.2 ft lb) plus an additional 90° - 1/4 turn
^
Never less then 90°!
^
Turning angle tolerance 90 to 120°
^
Always replace
9. Self-locking nut, 45 Nm (33 ft lb)
^
Always replace
10. Wheel bearing housing
For vehicles:
^
With gasoline engines up to and including 92 kW(123 Hp)
^
With SDI/TDI engine