Golf L4-1.9L DSL Turbo (BEW) (2004)
Shifter A/T: Service and Repair
Selector Lever Handle Removing and Installing
Removing and installing selector lever handle
Removing
-
Shift selector lever to position "R".
-
Slide sleeve -1- downward.
-
Pull button -2- out of handle -3- just enough so that pull lever-arrow- hangs down.
-
Pull handle off selector lever.
Installing
-
Shift selector lever to position "R".
-
Pull button -2- out of handle -3- just enough so that pull lever -arrow- hangs downward.
-
Press handle on selector lever onto stop.
Installation position: Button points to driver.
-
Pull button out slightly and guide pull lever -arrow- into handle.