Golf L4-1.9L DSL Turbo (BEW) (2004)
/Page-1046003.png)
-
Carefully pry off breather cap -1-.
-
Remove bolts from valve body -2-.
-
Using a screwdriver (for example), carefully lift valve body cover off transmission housing.
-
Pull off connectors -1- and -2-.
-
Remove transmission sensor wiring harness -3- from retainer tabs -4- on side of valve body.
-
Unscrew only bolts marked with an arrow (silver colored) to remove valve body.
When removing the valve body, the manual valve remains in the valve body.
-
Secure manual valve so that it cannot fall out.
-
Remove sealant residue on transmission housing using a scraper.
-
Remove sealant residue on pan with a rotating brush, e.g. a hand drill with a plastic brush (wear protective glasses).
