Golf L4-1.9L DSL Turbo (BEW) (2004)
The chamfer on tripod star faces toward shaft, this is used as an assembly aid.
-
Install triple roller star onto shaft and press onto stop.
-
Make sure that the pressure does not exceed 3.0 t (6614 lb)!
-
If necessary coat axle shaft splines and triple-roller star with lubricating paste G 052142A2.
-
Insert circlip, make sure seated correctly.
-
Press 70 grams (2.47 oz.) of joint grease from repair kit, into triple roller joint.
-
Slide joint over rollers and hold.
-
Press 60 grams (2.1 oz.) of joint grease, from repair kit, into the reverse side of the triple roller joint.
-
Install joint protective boot.
Assembling triple roller star
Cylindrical-type axle shaft
-
Install triple roller star onto shaft and press onto stop.
-
Make sure that the pressure does not exceed 3.0 t (6614 lb)!
-
If necessary coat axle shaft splines and triple-roller star with lubricating paste G 052142A2.
-
Insert circlip, make sure seated correctly.
-
Press 70 grams (2.47 oz.) of joint grease from repair set, into triple roller joint.
-
Slide joint over rollers and hold.
-
Press 60 grams (2.1 oz.) of joint grease, from repair set, into the reverse side of the triple roller joint.