Golf L4-1.9L DSL Turbo (BEW) (2004)
-
Remove bolts -1- (for lock).
-
Remove upper carrier assembly off door, lift and lift out of door toward hinge side -arrow- of door.
-
Next, loosen two clips for electrical wire from reinforcing plate in door and disconnect wire from boot.
Installing quarter window
-
Insert quarter window into door (arrow A). A soapy solution can be used as a lubricant to ease the installation.
-
Position window guide -1- to door flange -2- from exterior and turn 90° to exterior.
-
Install window guide, as shown in illustration, into window shaft.
-
Press window shaft seal -3- downward (arrow B) onto door flange.
-
Insert window guide -1- into door flange -2- and complete assembly.
Remaining installation is in reverse order of removal.