Golf L4-1588cc 1.6L DSL SOHC (1987)
Shifter M/T: Service and Repair
Removing and Installing Shift Lever and Shift Rod
Exploded view of gearshift lever and related parts
Removal is necessary to replace the bearing assembly or the ball if either is determined to be cracked or worn.
The exhaust pipe will need to be removed.
After installing the shift lever and shift rod, the mechanism should be adjusted using the special Volkswagen gauge as described above.
To remove and install shift lever and shift rod:
1. Unscrew the shift knob. Remove the boot by detaching it at the bottom and pulling if off over the gearshift lever.
2. Remove the center console.
3. Remove the exhaust pipe from the exhaust manifold. Remove the exhaust heat shield.