volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

All Technical Service Bulletins for License Plate Frame: > < Trunk / Liftgate Switch|Locations
Page 1
background image

License Plate Frame: Customer Interest
License Plate Trim, Rear - Cracked at Lower Left Corner

Group: 66

Number: 96-02

Date: Mar. 15, 1996

Subject: 
Rear License Plate Trim, Replacing

Model(s): 
Golf, GTI 1996

Condition

License plate trim -2- cracked at lower left comer (may be caused by the square shouldered screw at the lower left mounting point -A-).

Service

Remove damaged license plate trim -2- from the rear lid -1- and replace noting the following:

-

Make sure lower left mounting point at -A- is free of molding flash; remove as necessary

-

Paint license plate trim.

-

Grind or otherwise remove enough material from screw -3- to reduce thickness of square shoulder -b- by 0.3 to 0.4 mm (approx. 1/64-in.).

-

Treat modified screw -3- to protect against corrosion.

-

Carefully insert square shouldered screw completely into trim panel, using needle nose pliers if necessary.

-

Install trim panel with NEW seal, in reverse order of removal.

When procedure applies to vehicles within warranty use the following:

Part Identifier: 6683
Labor Operation: 6683211

40 TU 

Paint Labor: See SRT Microfiche

All Technical Service Bulletins for License Plate Frame: > < Trunk / Liftgate Switch|Locations