Golf L4-2.0L (ABA) (1996)
Valve: Service and Repair
LEGEND
1
Camshaft Bearing Cap
2
Camshaft Bearing Cap Nut
3
Camshaft
4
Woodruff Key
5
Camshaft Sprocket Bolt
6
Cylinder Head
7
Camshaft Seal
8
Cylinder Head Reworking Dimension
9
Valves
10
Valve Guide
11
Lower Valve Spring Seat
-
Discontinued as of 12/94
12
Valve Seal
13
Valve Springs
-
Inner spring discontinued as of 12/94
14
Upper Valve Spring Seat
15
Valve Keepers
16
Valve Lifters
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
COMPONENT NOTES
Camshaft Bearing Cap (1)
-
Note installed position.
-
Refer to installation sequence below.
Camshaft Bearing Cap Nut (2)
-
Tighten to 20 Nm (15 ft. lbs.).
Camshaft (3)
-
For Axial play, radial clearance and runout checking, refer to Testing and Inspection.
-
For installation sequence refer to procedure below.
Woodruff Key (4)
-
Check for tight fit.