Golf L4-2.0L (ABA) (1996)
Accelerator Pedal: Testing and Inspection
VEHICLES WITH MANUAL TRANSMISSIONS
-
Press and hold the Accelerator Pedal all the way down.
-
Adjust Accelerator Pedal Cable by moving the clip on the bracket until the throttle valve is fully open (Wide Open Throttle position).
VEHICLES WITH AUTOMATIC TRANSMISSIONS
-
Place spacer -1- between Accelerator Pedal -2- and stop -3- and hold Accelerator Pedal in this position.
-
Dimension -a- = 15 mm (0.59 in.)
-
Adjust Accelerator Pedal cable by moving clip -arrow- at stop until throttle valve is fully open (Wide Open Throttle position).
-
Release Accelerator Pedal.
-
Connect Fluke 83 multimeter to Kickdown Switch (F8) with adapter cables from VAG 1594.
-
Measure resistance on switch.
-
Specified value: Infinite Ohm (no continuity)
-
Slowly depress Accelerator Pedal past kickdown pressure point.
-
Resistance must drop to 0 Ohm (continuity)
-
Accelerator Pedal must be close to the stop