Golf L4-2.0L (AEG) (1999)
1
-
Upper trim panel
2
-
Tailgate
3
-
Four guide pins
4
-
Two securing clips
5
-
Two retainers for rear shelf
-
Left and right
6
-
Two spreader pins for retainer -5-
-
Left and right
7
-
Four clips
Removing
-
Remove lower trim.
-
Pull spreader pin -6- out from retainer -5- on left and right-hand sides.
-
Unclip trim -1- first along sides -arrow A- and then at top -arrow B-.
Installing
Install in reverse order of removal.
NOTE:
-
Before installing check clips -4- and clips -7- and replace as necessary.
Lower Trim
Assembly overview
1
-
Lower trim panel
2
-
Tailgate
3
-
Two screws
4
-
Two panel nuts
5
-
Ten clips
6
-
Upper trim
Removing
-
Remove screws -3- from tailgate -2-.
-
Unclip lower trim -1- from tailgate -2-.
-
Unclip lower trim -1- sides from upper trim -6- (push connector).