Golf L4-2.0L (AZG) (2004)
/Page-2184002.png)
^
Remove cover before installing Item 1
11. Breather line
^
Black
^
Check seated securely
^
- Press together at front to release
12. Pressure retention valve
13. Breather line
^
Black
^
Check seated securely
^
Clipped onto top of fuel tank
^
- Press together at front to release
14. Fuel tank
^
When removing, support with engine and transmission jack V.A.G. 1383 A
15. Clamping washer
16. Heat shield
^
- For fuel tank
17. 25 Nm
18. Lock nut, 2 Nm
19. Fuel tank cover
20. Securing strap
^
Note different lengths
^
Installation position: Fixing (holes) point forward
21. Supply line
^
Black
^
Check for secure seating
^
To remove from fuel filter, press release buttons on connecting piece.
^
- To fuel supply line on fuel rail
22. Fuel filter
^
Installation position: Arrows point in direction of flow
23. Screw-type clip
24. Breather line
^
White
^
Check seated securely
^
Clipped onto side of fuel tank
^
To Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
25. Seal
^
Replace if damaged
^
When installing, insert seal "dry" into fuel tank opening
^
Moisten seal with fuel only when installing flange or fuel delivery unit
26. Fuel delivery unit
27. Union nut, 75 Nm
^
- Remove and install using wrench 3217
28. Supply line
^
Black
^
Check for secure seating
^
Clipped onto side of fuel tank
^
To remove from fuel filter, press release buttons on connecting piece.
29. Return hose
^
Blue or with blue markings
^
Clipped onto side of fuel tank
^
Check for secure seating
^
To remove from flange press release buttons on connecting piece
^
- From fuel return line on fuel rail
30. Connector
^
Black, 4-pin
^
For Sender for fuel gauge -G- and Fuel Pump -G6
31. 10 Nm
