Golf L4-2.0L (AZG) (2004)
/Page-1610003.png)
Sensor -2- for brake pressure - G214 .................................................................................................................................................... 25 Nm (18 ft. lbs.)
-
Bleeding brake system Mark 60 IE
-
Initiate basic settings
-
A zero compensation of sender 1 for brake booster-G201- must be performed in addition to basic settings on vehicles with ABS/EDL/ASR/ESP.
Check function of brake assist in brake booster, vehicles from my 02.02
With engine running, depress brake pedal to ensure full vacuum boost.
When brake pedal is depressed, a "click" must be audible, so that the mechanical brake assist is activated.
The brake pedal can now be partially released and pressed again with less force.
It is not possible to repair the brake assist, the complete brake booster must be replaced.
