Golf L4-2.0L (AZG) (2004)
Notes on test table
-
The socket designations of adapter VAG 1598/31 (for test step 2) are identical to the engine control module contact designations in wiring
diagram.
-
If the readings obtained deviate from the specifications, carry out repair measure in the right-hand part of the table.
-
If the measured figures only deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G
000 700 04 ) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10
Ohms, repeat resistance check on the component.
Test Step 2
Test Step 2
Notes on test table
-
The socket designations of adapter VAG 1598/31 (for test step 2) are identical to the engine control module contact designations in wiring
diagram.
-
If the readings obtained deviate from the specifications, carry out repair measure in the right-hand part of the table.
-
If the measured figures only deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G
000 700 04 ) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10
Ohms, repeat resistance check on the component.
Test Step 3
Test Step 3
Notes on test table
-
The socket designations of adapter VAG 1598/31 (for test step 2) are identical to the engine control module contact designations in wiring
diagram.
-
If the readings obtained deviate from the specifications, carry out repair measure in the right-hand part of the table.
-
If the measured figures only deviate slightly from the specifications, clean sockets and plugs of the testers and adapter cables (with contact spray G
000 700 04 ) and repeat check. Before replacing components, check wiring and connections and also, particularly for specifications of less than 10
Ohms, repeat resistance check on the component.