Golf L4-2.0L (AZG) (2004)
/Page-1846002.png)
^
70 Nm (52 ft. lbs.) plus additional 90° turn
^
Always replace each time after removing
8. Plate with nuts
9. Self-locking nut, 45 Nm (33 ft. lbs.)
^
Always replace each time after removing
10. Ball joint
11. Hex head bolt
^
20 Nm (15 ft. lbs.) and turn 90° further
^
Always replace each time after removing
12. Control arm
13. Connecting link
14. Hex bolt, 45 Nm (33 ft. lbs.)
15. Self-locking nut, 30 Nm (22 ft. lbs.)
^
Always replace each time after removing
16. Stabilizer bar
The sub-frame must be lowered to remove and install.
17. Hex socket head bolt
18. Hex bolt M 14 x 1.5 x 95
^
100 Nm (74 ft. lbs.) plus additional 90° turn
^
Always replace each time after removing
19. Front control arm bushing
20. Hex bolt M 12 x 1.5 x 82
^
70 Nm (52 ft. lbs.) plus additional 90° turn
^
Always replace each time after removing
21. Hex bolt, 50 Nm (37 ft. lbs.)
^
M10 x 70
22. Hex bolt, 50 Nm (37 ft. lbs.)
^
M10 x 30
23. Pendulum support
24. Hex bolt, 25 Nm (18.4 ft. lbs.)
^
M8 x 48
25. Rubber bushing
26. Clamp
27. Hex bolt, 25 Nm (18.4 ft. lbs.)
28. Sub-frame
^
If damaged, do not repair threads in subframe for front control arm bolt
Bonded Rubber Bushings For Sub-Frame, Removing and Installing
Bonded rubber bushings for sub-frame, removing and installing
Special tools and equipment
^
VW 408 A Press tool
