Golf L4-2.0L (BEV) (2004)
/Page-2017002.png)
NOTE:
Use of separate tools T10057 is illustrated here. Procedure is essentially the same for tool JC4225 where all release prongs are integrated
into a frame.
-
Pull radio from instrument panel opening using handles on tools T10057 or frame of tool JC4225.
-
Disconnect electrical connections and antenna cable connection.
Note:
Radio must be pulled straight out from opening. Do not twist or tilt tools while removing.
-
To remove tool from radio, release locking tabs -arrow- on side of radio when removed.
Installing
-
Reconnect electrical connectors and antenna cable at rear of radio.
-
Insert radio into instrument panel opening and push straight in until locking tabs engage.
CAUTION! When installing radio unit, do not press on display or control buttons in order to engage locking tabs. Damage will result.
-
Input anti-theft security code.
-
Confirm radio coding for sound system functions using On Board Diagnostic program: "Code control module", function 07.
NOTE: Radio sound system coding must be performed in order to account for presence of CD changer (if installed) and interior sound field differences
between models.
