Golf L4-2.0L (BEV) (2004)
Models with an air conditioning system
-
Observe additional information and removal work.
-
Remove the four bolts for the air conditioning system condenser.
-
Remove bolt (arrow) on left of radiator for condenser bracket.
Continue for all models
-
Remove radiator securing bolts and take radiator with fan out downward.
Installing
Installation is performed in reverse order to removal, considering the following:
Additional information and assembly work on models with an air conditioning system
CAUTION: The air conditioning system refrigerant circuit must not be opened.
Note: To prevent damage to the condenser as well as to the refrigerant lines, ensure that lines and hoses are not stretched, kinked or bent.
-
Remove retaining clamp(s) from refrigerant lines.
-
Remover radiator securing bolts from side of radiator.
-
Remove condenser from radiator.
-
Secure condenser to body, so that refrigerant lines/hoses are not under stress.
-
Swing radiator out downward.