Golf L4-2.0L (BEV) (2004)
Water Pump: Service and Repair
Coolant pump, removing and installing
Special tools and equipment
-
T10007 Refractometer
-
V.A. G 1306 Drip tray
-
V.A.G. 1331 Torque wrench (5 to 50 Nm)
-
VAS 5024 Assembly tool for spring-type clips
Removing
Note:
^
Always replace seals and gaskets.
^
The lower section of the toothed belt guard need not be removed.
^
The toothed belt should be left in position on the crankshaft sprocket.
^
Cover the toothed belt with a cloth to protect it from coolant before removing the coolant pump.
-
Drain coolant.
-
Remove poly V-belt.
-
Remove tensioning element for poly V-belt.
-
Remove upper and center sections of toothed belt guard.
-
Take toothed belt off coolant pump toothed belt sprocket.